Winding Machines are widely used in many transformer and reactor manufacturing enterprises. Customers like to buy high-quality and low-cost products. We also have many matters to pay attention to when purchasing winding machines. However, many customers do not know much about their settings and use after purchasing winding machines. Correct use methods can prolong the service life of winding machines, Let's explain it in detail. I hope it will be helpful to your use.
1. First of all, you must have a good understanding of the wire type, characteristics, number of turns, appearance, material and winding speed of the skeleton:
1. For example, for self-adhesive wire and enamelled wire, the set wire diameter should be greatly increased, because the outer skin is not too smooth and has no inertia characteristics. 2. The winding speed of thin wire should not be too slow, but it must be started by slow climbing to avoid breaking the wire. 3. For thick lines, the speed should not be too fast (overspeed), but attention must be paid to whether the torque at medium and low speeds is sufficient. 4. When using aluminum wire, please note that the tension should be adjusted to be much smaller than that of copper wire of the same thickness, so as to avoid narrowing the wire diameter and bursting of the external insulating paint, which will affect the product quality. 5. When using aluminum wire, the set wire diameter shall be appropriately increased due to the decrease of tension. Combined with their own expansion needs, they can take fewer thread passing wheels.
SUZHOU DEGU MACHINERY CO.,LTD