SUZHOU DEGU MACHINERY CO.,LTD
The equipment adopts the computer CNC control system, the spindle is accurately determined by CPLD decoding speed measurement, and then equipped with a constant current chopper drive stepper motor line, fast and precise, to ensure the normal operation of the equipment, widely used in the production and manufacturing of switching power transformers, suppliers, inductance coils, Japanese type transformer and other productsThe aluminum coil winding packaging machine is a commonly used packaging machine in the packaging industry. If improper use is performed during the course of use, the packaging machine will sometimes have some problems, and it will organize the following common problems and corresponding solutions. First, the shrinking machine of the aluminum coil winding packaging machine is heating up slowly or it cannot rise to a higher temperature. The reason and the corresponding solution: The winding of the packaging machine heater is the main power line through a magnetic switch and then to the heating pipe, it should first detect the magnetic switch contacts are normal. If the line does not pass one of the phase, then The above phenomenon will occur. If the magnetic pick-up switch is normal, check the meter to see if the ohmic value of each phase and the machine is the same. If normal should be a short-circuit fault, if the phases are all turned on but the line or heater is still abnormal, the heater must be replaced.
Copyright © 2021 SUZHOU DEGU MACHINERY CO.,LTD All rights reserved.