6 Axis Automatic Wire Changer And Winding Machine

Introduction to common functions

The common functions of automatic winding machine include preset number of turns, automatic stop, positive and negative winding, automatic slot crossing, etc. in actual use, we should pay attention to several points. First, start winding idle and stop winding idle. Start winding idle is the function of slow running after starting the equipment, so as to reduce the impact on tension structure and enameled wire, Generally, it can be set as 1 to 3 turns according to the actual needs. The stop and idle function is that the equipment runs at a slow speed before ending the winding sequence. This function can reduce the impact on the brake and make the equipment finish winding smoothly, especially for the winding process that needs precise positioning. This parameter must be set according to the running speed of the equipment, The parameters should also be adjusted accordingly. Generally, it is 2 to 5 turns, and then the winding direction and the winding direction. These two parameters are respectively the setting of the winding displacement direction and the spindle rotation direction. The winding axis and the spindle of the Automatic Winding Machine are controlled by the controller, and there is a specific linkage relationship. When setting, the displacement direction of the winding axis must be clear, Many users report the equipment alarm during debugging, which is due to the equipment protection caused by the wrong setting. The Winding Machine has a zero detection point, which is used to position the winding shaft. If the equipment is started from the zero point, the winding shaft must move outward. If the equipment is set to move inward by mistake, it will cause the equipment alarm. The rotation direction of the winding shaft should be determined according to the winding process, All settings should fully consider the needs of winding process.