Side Double Shaft Brushless Winding Machine

How to set up and use Winding Machine 1

First, we must have a good understanding of the type and characteristics of the skeleton wire, the number of turns, the appearance material and the winding speed:

1, such as self-adhesive wire, enameled wire, etc., the set wire diameter to increase a lot, because the skin is not too smooth, more without inertia characteristics.

2. The winding speed of the thin wire should not be too slow, but it must be started with a slow climbing speed to avoid breaking the wire.

3, thick line speed should not be too fast (overspeed), but we must pay attention to whether the medium and low speed torque is enough.

4. When using aluminum wire, please pay attention that the expansion force should be much smaller than the copper wire of the same thickness, so as to avoid the wire diameter drawing and the external insulating paint bursting, which will affect the product quality.

5. When using aluminum wire, the set wire diameter should be increased appropriately due to the decrease of the expansion force. Combined with their own rise force needs to be able to go less over the line wheel.