Maintain wire coil winding machine 2

④ Check the drive. Check whether the pulley or coupling is broken or damaged, and whether the installation is firm; Whether the belt and its connecting buckle are in good condition.

⑤ For the starting equipment of Winding Machine, it is also necessary to clean the external dust and dirt, wipe the contact, check whether there are burning traces in each wiring part, and whether the grounding wire is in good condition.

⑥ Inspection and maintenance of bearings. The bearing should be cleaned and replaced with grease or oil after being used for a period of time. The cleaning and oil changing time shall be determined by the working condition, working environment, cleaning degree and lubricant type of the winding machine. In general, every 3-6 months of work, should be cleaned once, replace grease. When the oil temperature is high, or the environmental conditions are poor, the winder with much dust should be cleaned and changed frequently. The methods of cleaning and replacing grease for rolling bearings have been mentioned before and will not be repeated here.