Home> Products> Automatic Common Mode Inductance Winding Machine

Automatic Common Mode Inductance Winding Machine

(Total 5 Products)

  • Environmentally Friendly Inductance Winding Machine

    USD 15000 ~ USD 20000

    Brand:Degu

    Model No:ACMIWM

    Transportation:Ocean,Land,Air,Express

    Packaging:wooden box

    Supply Ability:1000 set / month

    Place of Origin:China

    Productivity:1000 sets/ month

    Environmentally Friendly Inductance Winding Machine The Simple Maintenance winding machine adopts the programmable controller as the control core of the equipment, and cooperates with the manipulator, pneumatic control components and execution...

  • High Quality Automatic Inductor Winding Machine

    USD 15000 ~ USD 20000

    Brand:Degu

    Model No:DG909

    Transportation:Ocean,Land,Air,Express

    Packaging:wooden box

    Supply Ability:1000 set / month

    Place of Origin:China

    Productivity:1000 sets/ month

    High Quality Automatic Inductor Winding Machine The stable automatic inductor winding machine needs to be equipped with the spindle speed regulation function, and the configuration of the winding equipment should be different depending on the type...

  • High Performance Automatic Inductor Winding Machine

    USD 15000 ~ USD 20000

    Brand:Degu

    Model No:DG909

    Transportation:Ocean,Land,Air,Express

    Packaging:wooden box

    Supply Ability:1000 set / month

    Place of Origin:China

    Productivity:1000 sets/ month

    High Performance Automatic Inductor Winding Machine Excel For Automatic Inductor Wire Winder is a machine that winds a wire-like object onto a specific workpiece. The production advantage of Recommend Automatic Inductor Winding Machine, the...

  • Highly Recommend Automatic Winding Induction Machine

    USD 15000 ~ USD 20000

    Brand:Degu

    Model No:DG909

    Transportation:Ocean,Land,Air,Express

    Packaging:wooden box

    Supply Ability:1000 set / month

    Place of Origin:China

    Productivity:1000 sets/ month

    Highly Recommend Automatic Winding Induction Machine Safe Operation Automatic Winding Induction Machine is a machine that winds linear objects onto specific workpieces. The Good Sales Automatic Winding Induction Machine needs to be equipped with the...

  • Automatic common mode inductance winding machine

    USD 15000 ~ USD 20000

    Brand:Degu

    Model No:DG909

    Transportation:Ocean,Land,Air,Express

    Packaging:wooden box

    Supply Ability:1000 set / month

    Place of Origin:China

    Productivity:1000 sets/ month

    Automatic common mode inductance winding machine Product Description Coming soon, stay tuned Packaging & Shipping We packaged with plastic film and wooden case. We select difference ship way based on your requirement. Our Services We can design...

Common mode inductor winding direction difference?

1: Is the winding direction of common mode inductor opposite? This is bullshit. The winding direction of common mode inductors is the same, and the magnetic fluxes of common mode current parameters cancel each other. Therefore, magnetic materials with high permeability can be used to achieve small volume and large inductance without saturation. The interference between the two power lines to the ground is called common mode interference. How does this common mode inductor work when there is no ground wire on my power supply? The so-called common mode current is the current flowing into or out of the LN line at the same time. When testing the conduction, use the artificial LISN network. The relevant knowledge can remind you not to forget the parasitic capacitance of PE.

2: Common mode winding inductance is to wind two windings with the same phase and same number of turns on the same magnetic core. The reverse magnetic field generated by the current will cancel each other, so it will not cause saturation. As for the winding direction you see, I don't know if it is the winding direction. If it is wound on the same side, then the two winding directions are opposite, one clockwise and the other counterclockwise, If it's a different side winding, it's clockwise. So this problem is a little different. It depends on how you define it. No matter how you wind, it's OK to ensure the same phase and number of turns. For the second question, refer to the answer from the upstairs. Generally, the test conduction needs to be connected to the LISN, and output to the load, the load and the product to be tested through the LISN. There is GND access signal on the LISN.

Automatic Winding Machine003 Jpg


What is the difference between wound inductor and laminated inductor?

Wound inductor is the product of traditional wound inductor miniaturization. Laminated inductor is made by multi-layer printing technology and laminated production process, and its volume is smaller than wound chip inductor.

Winding inductor: it is characterized by a wide range of inductors (MH ~ H), high accuracy of inductor, small loss (i.e. large Q value), large allowable current, strong inheritance, simple manufacturing process and low cost; The disadvantage is that it is limited in further miniaturization. The ceramic core wound chip inductor can maintain a stable inductance and a fairly high Q value at such a high frequency, so it occupies a place in the high frequency circuit.

Related Products List
Home> Products> Automatic Common Mode Inductance Winding Machine

Contact

  • Mobile Phone: +8617372731333
  • Address: No. 67, SUNWU ROAD , Suzhou, Jiangsu China

Send Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send